The "EPWM_setCounterCompareValue(myEPWM0_BASE, EPWM_COUNTER_COMPARE_A, duty_value)" function is too slow to use at run time so I would like to know how to use the HWREG macro or any other method ...

I modified the configuration of a customer board based on the AM62x-evm, and the image and sdk can be successfully compiled through the command. $ MACHINE=am62xx-customer bitbake tisdk-customer-image ...

Order of millivolts output swing to be fed into an ADC I'm using currently using TINA-TI to simulate the TIA, with the ultimate goal of producing a tangible physical version of the circuit in the ...

1. Source Code Path:edgeai-app-stack/edgeai-tiovx-apps/tests/app_tiovx_v4l2_capture_module_test.c 2.Test scene: (1)Only the video is recorded, and the writeRawImage ...

Our digital power monitors, including INA232, measure two voltages – shunt and bus. There are separate specifications for them. The 50uV spec is Vos of shunt voltage (on range of 20mV or 80mV); and ...

We want to add delay function circuit at the TLV7011 output end to get several ms delay. Do you have any suggestion circuit?

I would like to ask a question because I need to get the spice model of TPS92512. I have downloaded TINA-TI and simulated this part but now I would like to transfer it into LTSpice. When I wnated to ...

For this we can use UniFlash (with XDS110 Debugger) with Command Line UniFlash to automate the flashing process, or flash multiple CC2340s: ...

In our system we use uart to download tiboot3.bin, tiboot3.bin down load tispl.bin via tftp and tispl.bin download u-boot.img, we config TFTP blocksize = 65535. The problem is the speed to download ...

I'm using TPS54360 power switching regulator with enable voltage of 1.2V. So I have set the input voltage range is in 18V-24V. I'm experiencing device shutdown for 7.5ms after powering up the system ...

I got stuck at using TI's "Solar_CLA.h". We have successfully initialized CLA and ran simple task which was perfectly working. In the next step, I followed the steps provided in the Solar Library ...

I'm going to use AWR1642EVM with DCA1000 to get the MIMO raw data, and generate a virtual antenna array. (as figure 5) (FIGURE BELOW IS FROM TI DOCUMENT.) I know that there are two TX and four RX on ...